WORKSHOP TECHNOLOGY Syllabus -IOE | IOE Notes | Notices | Examination | Engineering in Nepal


Lecture       : 1                                                                                                            Year: I Pra...

Lecture       : 1                                                                                                            Year: I
Practical    : 3                                                                                                            Part: I/II

Course Objective:          The subject aims at imparting knowledge and skill components in the field of basic workshop technology. It deals with different hand and machine tools required for manufacturing simple metal components and articles.
After the completion of the course, the student shall be able to
1.       Practice workshop safety rules effectively
2.       Acquire knowledge and use simple hand tools
3.       Acquire knowledge and use simple measuring and gauging instruments
4.       Operate simple drilling machines for producing small holes
5.       Operate various machine tools for producing simple metal components and articles
6.       Acquire knowledge and practice on foundry, forging and welding

1.       General safety Considerations                                                                                    (2 hours)
1.1.        Bench Tools                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               
1.2.        Machinist’s Hammers
1.3.        Screw Drivers
1.4.        Punches
1.5.        Chisels
1.6.        Scrapers
1.7.        Scribers
1.8.        Files
1.9.        Pliers and Cutters
1.10.     Wrenches
1.11.     Hacksaw
1.12.     Bench Vise
1.13.     Hand drill
1.14.     Taps and Dies
1.15.     Hand Shears
1.16.     Rules, Tapes and Squares
1.17.     Soldering Iron
1.18.     Rivets

2.       Hand Working Operations                                                                                          (1 hours)
2.1.        Sawing
2.2.        Filing
2.3.        Threading
2.4.        Scribing
2.5.        Shearing
2.6.        Soldering
2.7.        Riveting

3.       Measuring and Gauging                                                                                                (1hours)        
3.1.        Introduction
3.2                Semi – Precision Tools – Calipers, depth Gauge, Feeler Gauge
3.3          Precision Tools – Micrometers, Vernier Calipers, Vernier Height Gauge, Telescopic Gauge, Hole Gauge, Bevel Protractor, Dial Indicator, Gauge Blocks and Surface Plate

4.       Drills and Drilling Processes                                                                                       (1 hours)
4.1                Introduction
4.2                Types of Drill Presses
4.3                Work Holding Devices and Accessories
4.4                Cutting Tools
4.5                Geometry of Drill Bits
4.6                Grinding of Drill Bits
4.7                Operations – Drilling, Counter - boring, Counter - sinking, Reaming, Honning, Lapping
4.8                Cutting Speeds
4.9                Drilling Safety

5.       Machine Tools                                                                                                                 (4 hours)
5.1.     General Safety Considerations
5.2                Engine Lathes
5.2.1           Introduction
5.2.2           Physical Construction
5.2.3           Types of Lathe
5.2.4           Lathe Operations – Facing, Turning, Threading
5.3                Shapers
5.3.1           Introduction
5.3.2           Types of Shapers
5.3.3           Physical Construction
5.3.4           General Applications
5.4                Milling Machines
5.4.1           Introduction
5.4.2           Types of Milling Machines
5.4.3           Physical Construction
5.4.4           Milling Cutters – Plain, Side, Angle, End, Form
5.4.5           Milling Operations – Plain, Side, Angular, Gang, End, Form, Keyway
5.4.6           Work Holding Devices
5.4.7           Cutter Holding Devices
5.5                Grinding Machines
5.5.1           Abrasives, Bonds, Grinding Wheels
5.5.2           Rough Grinders – Portable Grinders, Bench Grinders, Swing Frame Grinders, Abrasive Belt Grinders
5.5.3           Precision Grinders – Cylindrical Grinders, Surface Grinders

6.       Material Properties                                                                                                        (1 hours)
6.1.        Tool materials – Low, medium and high carbon steels; Hot and cold rolled steels; Alloy steels; Carbide and Ceramic materials
6.2.        Heat treating methods for steels – Annealing, Tempering, Normalizing, Hardening and Quenching
6.3.     Non – ferrous metals – Brass, Bronze, Aluminum – Comparative Properties

7.       Sheet Metal Works                                                                                                         (1 hours)
7.1.        Introduction
7.2.        Sheet Metal Tools
7.3.        Marking and Layout
7.4.        Operations – Bending, Cutting, Rolling

8.       Foundry Practice                                                                                                            (1 hours)
8.1.        Introduction
8.2.        Pattern Making
8.3.        Foundry Tools
8.4.        Core Making
8.5.        Melting Furnace – Cupola
8.6.        Sand Casting Process

9.       Forging Practice                                                                                                             (1 hours)
9.1.        Introduction
9.2.        Forging Tools
9.3.        Operations – Upsetting, Drawing, Cutting, Bending, Punching
9.4.        Forging Presses and Hammers
9.5.        Advantages and Limitations

10.    Metal Joining                                                                                                                   (2 hours)
10.1       Safety Considerations
10.2       Introduction
10.3       Soldering
10.4       Brazing
10.5             Welding – Gas Welding, Arc Welding, Resistance Welding, Tungsten Inert  Gas Welding (TIG), Metal Inert Gas Welding (MIG)

Workshop Practice: 3 hours/week; 15 weeks

1.       Bench Tools and hand operations: Measuring, Marking, Layout, Cutting, Filling, Drilling, Tapping, Assembly
2.       Bench Tools and hand operations: (Contd.)
3.       Drilling machines
4.       Measuring and Gauging Instruments
5.       Engine lathe: Basic operations such as Plain turning, facing, cutting off, knurling.
6.       Engine lathe: Taper turning, drilling and boring
7.       Basic Shaper Operations
8.       Milling Machines
9.       Grinding Machines
10.    Sheet Metal works
11.    Foundry Practice
12.    Forging Practice
13.    Electric Arc Welding
14.    Gas Welding

1.             “Shop Theory”, J. Anderson and E. E. Tatro, McGraw – Hill, 5th Edition, 1942
2.             “Machine shop operations and setups”, O. D. Lascoe, C. A. Nelson and H. W. Porter, American Technical society, 1973
3.             “Machine shop Practice – Vol. I” , Industrial Press, New York, 1971
4.             “Machine shop Practice – Vol. I” , Industrial Press, New York, 1971
5.             “ Technology of Machine Tools”, Mc Graw Hill – Ryerson, 3rd Edition
6.             “Machinery’s Handbook”, Oberg, Jones and Horton, 23rd Edition, Industrial Press, New York.
7.             “Elements of Workshop Technology - Vol. I ( Manufacturing Processes)” – S. K. Hajra Choudhury and A. K. Hajra Choudhury – Media Promoters and Publishers Pvt. Ltd. , Bombay, INDIA, Tenth Edition, 1993
8.             “Elements of Workshop Technology - Vol. II: (Machine Tools)” – S. K. Hajra Choudhury, S. K. Bose and A. K. Hajra Choudhury – Media Promoters and Publishers Pvt. Ltd. , Bombay, INDIA, Eight Edition, 1988
9.             “A Course in Workshop Technology - Vol. I” – Prof. B. S. Raghuwanshi – Dhanpat Rai and Co. (P) Ltd, Delhi, INDIA, Ninth Edition, 2002
10.          “A Course in Workshop Technology - Vol. II” – Prof. B. S. Raghuwanshi – Dhanpat Rai and Co. (P) Ltd, Delhi, INDIA, Ninth Edition, 2002
11.          “Workshop Technology - Vol. I” – H. S. Bawa – Tata Mc – Graw Hill publishing company Limited, New Delhi, INDIA,
12.          “Workshop Technology - Vol. II” – H. S. Bawa – Tata Mc – Graw Hill publishing company Limited, New Delhi, INDIA,
A text book of Workshop Technology - R. S. Khurmi and J. K. Gupta - S. Chand and Company Ltd, New Delhi. INDIA
Search Terms ✅: ioe exam ioe entrance ioe result ioe entrance result 2073 ioe result 2073 ioe entrance result pulchowk campus pulchowk campus entrance exam pulchowk engineering campus ioe pulchowk ioe syllabus ioe result 2016 exam ioe ioe entrance exam model question pulchowk engineering campus ranking ioe result 2072 ioe online form khwopa engineering college leaving cert leaving certificate entrance ioe np ioe entrance form ioe exam result be result state examination board pulchowk entrance exam 2072 kantipur engineering college ioe engineering ioe syllabus for electrical engineering ioe library engineering college in nepal ioe form ioe test tu exam routine 2073 tu routine state examinations ioe entrance online form examinations pulchowk engineering college state examinations commission state exams commission ioe entrance 2073 result ioe pulchowk campus tu exam routine tu result with marksheet advanced college of engineering and management bbs 2nd year result 2072 ioe 2073 result ioe results 2073 pulchowk engineering campus entrance

4th semester,3,Admission,6,Aerospace Engineering,1,Applied Mechanics,4,Articles,3,assessment,3,Back Exam,1,BBA,1,BCE,24,BCT,11,BCT Notes,4,BE,1,BEX,8,Books,8,Bridge,1,BSCSIT,2,Building Technology,1,C,2,C Programming,3,CAAN,1,Chemistry,6,Civil,3,CODE,7,Communication English,4,Cummnication English,1,Drawing,4,Electrical Engineering,1,Engineering Physics,2,Entrance For BE,26,Entrance for,5,EPP,2,Exam,2,Exam Center,1,FAQ,4,Featured,3,Fluid Mechanics,2,Foundation,1,Guide,2,Guidelines,4,Hand Written,2,HEX,1,How to ?,2,Hydraulics,2,Hydrology,2,Hydropower,1,IOE,13,IOE College,3,IOE Engineering Drawing,2,IOE Exam Routine,6,IOE Nepal,2,IOE PDF Notes,33,IOE Solution,2,IOE Syllabus,18,IT,1,Jobs,2,Kathmandu University,3,Lab Sheet,1,Lecture Note,12,List,1,Loksewa,16,Math Solution,2,Mechanical,1,Model Questions,2,Msc,4,NAC,2,NBC,1,NEC,1,Notes,6,NOTICES,5,NTC,2,Numbrical Method,2,Old Questions,14,PEE,1,Pokhara University,4,PoU Syllabus,1,Programming,2,Project,2,Project Engineering,1,PSC,4,PU,2,Purbanchal University,7,Quota,1,RCC,2,Report,6,Results,3,Road,1,Rural Road Engineering,1,Sanitary Engineering,2,Soil Mechanics,1,Solutions,8,Surveying,1,Syllabus,13,Transportation,2,Tutorial Solutions,1,
IOE Notes | Notices | Examination | Engineering in Nepal : WORKSHOP TECHNOLOGY Syllabus -IOE
IOE Notes | Notices | Examination | Engineering in Nepal
Loaded All Posts Not found any posts VIEW ALL Readmore Reply Cancel reply Delete By Home PAGES POSTS View All RECOMMENDED FOR YOU LABEL ARCHIVE SEARCH ALL POSTS Not found any post match with your request Back Home Sunday Monday Tuesday Wednesday Thursday Friday Saturday Sun Mon Tue Wed Thu Fri Sat January February March April May June July August September October November December Jan Feb Mar Apr May Jun Jul Aug Sep Oct Nov Dec just now 1 minute ago $$1$$ minutes ago 1 hour ago $$1$$ hours ago Yesterday $$1$$ days ago $$1$$ weeks ago more than 5 weeks ago Followers Follow THIS CONTENT IS PREMIUM Please share to unlock Copy All Code Select All Code All codes were copied to your clipboard Can not copy the codes / texts, please press [CTRL]+[C] (or CMD+C with Mac) to copy